Rebreather World - View Single Post

Digger · 24th July 2006, 21:45

Valve in the black and decker, shirt off, and hug the tank. You'll get it off this way if the valve hasn't been twatted in too hard.

Either that or a large spanner across the flats and the tank in some soft grip vice/bottle vice, and tap the end. You'll probably find it may be just stuck a bit, and once the initial pressure is off it will come out easy enough.

Make sure there's no gas in there either. Just for anyone else reading this!

Digs.

24th July 2006, 21:45	#3 (permalink)
Digger Custom Title Allowed! Current Rebreather/s: Inspiration Classic Other Rebreather/s: Not Bought Yet Inspiration Classic Classic Kiss Join Date: Feb 2005 Location: Midlands UK Posts: 206	Re: Removing cylinder valves Valve in the black and decker, shirt off, and hug the tank. You'll get it off this way if the valve hasn't been twatted in too hard. Either that or a large spanner across the flats and the tank in some soft grip vice/bottle vice, and tap the end. You'll probably find it may be just stuck a bit, and once the initial pressure is off it will come out easy enough. Make sure there's no gas in there either. Just for anyone else reading this! Digs.
(Offline)