Quote: (Originally Posted by ccscuba)
Hi everyone.
A while ago someone posted the details of the swagelock fittings for the ouroboros - it may have been on the forum but I can't get into that for some reason.
I need a spare diluent side swagelock fitting to go on a drop bottle - could anyone help with the part number or do I have to get it from Delta P?
thanks,
Martin
Be careful they are 'keyed'
The part numbers phil put up are not the same as the ones the factory uses.
Just got this lot delivered - spent a damn fortune!
Im using the larger SS-QC6-D-4PFK1-SC11 for my offboards But the original ones were QC4's. If you look on the connectors on your manual injectors you should be able to read the 'Key' number. I 'think' its 'Key 1' for the Dil, not sure what the O2 one is. You need to get the right key number as they dont inter-fit.
So likely the part number you need for male (stem) connector is
SS-QC4-D-4PFK1-SC11,
but best confirm yourself.
SS = stainless
QC4 = is size
D = desco sealed
4PF = thread size/male/female (choose to match your hose fitting)
K(n) = Key size (choose to match those on your unit)
SC11 = O2 service (if using with O2)
To give you an idea of price Im paying 33 UKP each for larger QC6 ones
Id also recommend getting some protective caps. The stems are fragile and easily damaged the SS caps clip over them and keep them clean and safe - priced at 15UKP (for QC6 size)
Part number SS -QC4-SP-K
1 (or whatever your Key number is)
SP = stem protector