Rebreather World - View Single Post

E-man · 23rd June 2006, 17:37

not really, the difference is so slight that water temp changes would most likely shroud it
heat from the scrubber means the scrubber is scrubbing if theres no heat then the scrubbers not scrubbing
the temp stick works as it shows where the heat is coming from the scubber

XXXXX>>>>> where X is heat and > is cool

^ that shows half of the scubber is used up

once the heat gets to the dsv theres no conclusion of where the heat came from so no, not much of a distinction of the state of the sorb

23rd June 2006, 17:37	#6 (permalink)
E-man On the loop! Current Rebreather/s: Inspiration Classic Optima Other Rebreather/s: Titan Join Date: Sep 2005 Location: Eastern Coast ;) Posts: 212	Re: Loop Gas Temperature not really, the difference is so slight that water temp changes would most likely shroud it heat from the scrubber means the scrubber is scrubbing if theres no heat then the scrubbers not scrubbing the temp stick works as it shows where the heat is coming from the scubber XXXXX>>>>> where X is heat and > is cool ^ that shows half of the scubber is used up once the heat gets to the dsv theres no conclusion of where the heat came from so no, not much of a distinction of the state of the sorb
(Offline)