Rebreather World - View Single Post

***caveseeker7*** · 22nd June 2006, 16:43

Quote: (Originally Posted by henckell)

The restart problem erases the tissue data which is bad, but it also fires the solenoid when it comes back. This needs to be fixed in the SW. I don't know how things are implemented, but a (re)start UW should not trigger the solenoid regardless if it's part of a test sequence or if the SW detects a PO2 of 0.00 (<0.20 -> automatic solenoid fire regardless of firing mode), which is displayed for a few seconds after each restart.

On another controller the solenoid test firing is tied in with the depth sensor.
On the surface and to around 6 m it fires twice, below 6 m it doesn't.

22nd June 2006, 16:43	#10 (permalink)
*caveseeker7* Who loves ya, baby Current Rebreather/s: Sport Kiss Other Rebreather/s: Prism Topaz Join Date: Jan 2005 Location: Too far from Neverland Posts: 5,451	Re: HammerHead Suggestions Quote: (Originally Posted by henckell) The restart problem erases the tissue data which is bad, but it also fires the solenoid when it comes back. This needs to be fixed in the SW. I don't know how things are implemented, but a (re)start UW should not trigger the solenoid regardless if it's part of a test sequence or if the SW detects a PO2 of 0.00 (<0.20 -> automatic solenoid fire regardless of firing mode), which is displayed for a few seconds after each restart. On another controller the solenoid test firing is tied in with the depth sensor. On the surface and to around 6 m it fires twice, below 6 m it doesn't. __________________ Cheers Stefan "Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.!"
(Offline)