View Single Post
Old 19th June 2006, 18:43   #5 (permalink)
dive2dive2000
PRISM DIVER & LUVIN IT!
 
dive2dive2000's Avatar

Current Rebreather/s:
Prism Topaz

Other Rebreather/s:
 
Join Date: Feb 2005
Location: Long Island, NY
Posts: 788
dive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nicedive2dive2000 is just really nice
Send a message via MSN to dive2dive2000 Send a message via Yahoo to dive2dive2000
Re: Sidemounting with Aluminum Tanks

Quote: (Originally Posted by ScubaDadMiami)
I guess I should have mentioned another thing: I am not using the bungee cord for the top of the tanks. I am clipping them to my shoulder d-rings. So, the top of the tank is low, and the bottom goes high. I figured that lengthing the back and weighting it a little would keep the tanks parallel to me although a bit lower than using a full sidemount setup with bungees.

I haven't used the bungees because I can't see how you can remove and install the bottles quickly when having to pass them back and forth while using open circuit during a bailout. Perhaps I am missing something here. If so, please give me the good word about this.

Thanks again.
Then why side mount? You should be able to don and remove just as easy, not sure what you are doing. Your set up does not make sense to me, you are hanging the neck of the bottle in front of you and trying to hang the bottom behind you
__________________
Safe Diving,
Martin

"but what's the fun of getting what you need, instead of what you want?"
(Offline)
 
Reply With Quote