Rebreather World - View Single Post

***jradomski*** · 14th June 2006, 06:19

Quote: (Originally Posted by ScubaDadMiami)

Besides putting silicone in the holes (as was advised in earlier posts), how about soaking in some Salt-X (or equivalent) when doing the post-dive clean up after returning to port, and then rinsing? It is pretty tough to get a good rinse on the dive boat, which means it could be a while before returning to port and getting a chance to do a good post-dive rinse.

SAlt X, would probably do a good job..

So far I have had good luck with rinsing with fresh water across the face (so that there is a chance water can get behind the bezel from the center then move outward.. I then dip in fresh water... with a good soak (15 or 20 minutes) at the end of the day..

14th June 2006, 06:19	#24 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,113	Re: Funky HH problem Quote: (Originally Posted by ScubaDadMiami) Besides putting silicone in the holes (as was advised in earlier posts), how about soaking in some Salt-X (or equivalent) when doing the post-dive clean up after returning to port, and then rinsing? It is pretty tough to get a good rinse on the dive boat, which means it could be a while before returning to port and getting a chance to do a good post-dive rinse. SAlt X, would probably do a good job.. So far I have had good luck with rinsing with fresh water across the face (so that there is a chance water can get behind the bezel from the center then move outward.. I then dip in fresh water... with a good soak (15 or 20 minutes) at the end of the day.. __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)