Quote: (Originally Posted by astralcat)
Hi,
I've been diving my Prism for a couple years. I'm interested in communicating with other Prism divers about Mods.
Thanks in advance!
-Glenn
Hi Glenn
First off you might want to trim back those breathing hoses
Ok my Mods are pretty simple so far.
Replaced the Dil First stage with a Zeagle DSV, makes for better hose routing
Stripped off the Gimp harness and running the lower half of a Zeagle TecPac whilst still using the lungs for the shoulder, combined with a Zeagle SS backplate for some weight all held onto the PRISM ABS plate with one of Tobin’s "Cool Hardware" Plate conversion kits.
Longer SPG hoses now feed through the back of the lung and just pock out the bottom
I mount the weights in the very top of the lungs as oppose to the pockets I find I need less weight to get trim, I just have a loop of rope that goes over the plastic clasp and the weights are suspended in the lung.
Installed a Manifold and now run a Bungy necklace second stage and a normal inflator as oppose to the ScubaPro Air2, also allows me to plug in off board gas.
Shutoff valve on the ADV
Sidemount my bailout Ala Armadillo style
Planning on removing the analogue secondary and replacing it with a digital from Jason M
Replaced the foam pads in the bottom of the bucket that so nothing to some cut out chamois as they absorb the moisture soo much better
Umm that’s about it so far....
Cheers
Chriso