Rebreather World - View Single Post

Mark Chase · 5th June 2006, 18:39

Quote: (Originally Posted by jradomski)

Mark,

If they are reading 9,10, and 12 and the cells are still linear, you might not be flushing as well as you think..

1) make sure the adv has a flow stop on it and shut when flushing..

2) make sure you insure gas passes through the enite loop.. dont forget the exhale part of the DSV hose to exhale lung..

It does take a bit of practice to get it correct..

I am doing this in a plastic bag and getting exactly the same readings as I was getting on the unit. This makes me think I am doing it OK on the unit.

ATB

Mark Chase

5th June 2006, 18:39	#8 (permalink)
Mark Chase I go down for ages Current Rebreather/s: Classic Kiss Other Rebreather/s: Inspiration Classic Join Date: Jan 2005 Location: Kent Posts: 2,700	Re: Mv output on new Bud R22 Cells? Quote: (Originally Posted by jradomski) Mark, If they are reading 9,10, and 12 and the cells are still linear, you might not be flushing as well as you think.. 1) make sure the adv has a flow stop on it and shut when flushing.. 2) make sure you insure gas passes through the enite loop.. dont forget the exhale part of the DSV hose to exhale lung.. It does take a bit of practice to get it correct.. I am doing this in a plastic bag and getting exactly the same readings as I was getting on the unit. This makes me think I am doing it OK on the unit. ATB Mark Chase __________________ Is it supposed to make that noise ? I took my unit to the dive shop and demanded they bolt on every thing that would fit. Join my elite diving teem and get a Tshirt "Doing It Chasey"Hammerhead Eccr Advanced Diving System
(Offline)