Rebreather World - View Single Post

Scuba_Vixen · 2nd June 2006, 03:13

Welcome to Rebreather World,

and the CCR Dolphin gang.

While you won't notice it in the pool, the Uwatec computer setup doesn't seem to do well in CCR mode.

If I recall the issue correctly; It isn't expecting the PO2 levels in the shallower depths, that while normal for ccr, would be wayyyy high for an scr, and there for doesn't process things properly.

There have been several threads here recently regarding that.

If I can find one, I'll adit the link.

A VR3 or Explorer is pretty much a "must have" for a ccr dolphin.

Darlene

Here's the thread I was thinking of, or at least one of them:

http://www.rebreatherworld.com/gener...ght=uwatec+air

2nd June 2006, 03:13	#2 (permalink)
Scuba_Vixen e/mCCR Dolphin Pilot Current Rebreather/s: Other CCR Home Build Other Rebreather/s: Other CCR Home Build Join Date: May 2005 Location: St. Croix USVI Posts: 557	Re: Newbie says hello Welcome to Rebreather World, and the CCR Dolphin gang. While you won't notice it in the pool, the Uwatec computer setup doesn't seem to do well in CCR mode. If I recall the issue correctly; It isn't expecting the PO2 levels in the shallower depths, that while normal for ccr, would be wayyyy high for an scr, and there for doesn't process things properly. There have been several threads here recently regarding that. If I can find one, I'll adit the link. A VR3 or Explorer is pretty much a "must have" for a ccr dolphin. Darlene Here's the thread I was thinking of, or at least one of them: http://www.rebreatherworld.com/gener...ght=uwatec+air Last edited by Scuba_Vixen : 2nd June 2006 at 03:20.
(Offline)