Rebreather World - View Single Post - Just became a mCCR-diver

zèècalcoene · 29th May 2006, 11:09

Yes indeed, a VR3 or HSE will be inevitable..
As well as a secondary PPO2 readout..
Marc Munroe's dislplays work fine and are very reliable (PPO2.com) or via TECME..
However, I am speaking from a practical point of view... the calibration method... i.e. removing end-cap and using a small screw driver to calibrate the sensors is a hassle..
I used them, so I know.
Look for a system with auto-calibration (as done with VR3 or HSE)

Just wanted to help

cheers

Ivan

29th May 2006, 11:09	#10 (permalink)
zèècalcoene New Member Current Rebreather/s: Dolphin Other Rebreather/s: Dolphin Join Date: Jan 2006 Location: Oostende, Belgium Posts: 14	Re: Just became a mCCR-diver Yes indeed, a VR3 or HSE will be inevitable.. As well as a secondary PPO2 readout.. Marc Munroe's dislplays work fine and are very reliable (PPO2.com) or via TECME.. However, I am speaking from a practical point of view... the calibration method... i.e. removing end-cap and using a small screw driver to calibrate the sensors is a hassle.. I used them, so I know. Look for a system with auto-calibration (as done with VR3 or HSE) Just wanted to help cheers Ivan __________________ mCCR Dolphin Diver
(Offline)