Rebreather World - View Single Post

Jeff Keep · 10th April 2006, 07:11

Hi Folks,
Ive just purchase a meg and was wandering the best way to rig an argon cylinder.
I have a 1.5L ali cylinder and have tried clamping it to the rear, just behind the dill but was not happy with the profile.
I currently have it clipped to the side of my backplate as I did when o/c, this is ok but a little cumbersome.
I would be happy purchasing a new thinner cylinder i.e steel 1L but cant find one anywhere.
Any Ideas please.

Regards,

Jeff

10th April 2006, 07:11	#1 (permalink)
Jeff Keep New Member Current Rebreather/s: Inspiration Classic Evolution Megalodon Other Rebreather/s: Join Date: Apr 2006 Location: Manchester UK Posts: 5	suit inflation on meg Hi Folks, Ive just purchase a meg and was wandering the best way to rig an argon cylinder. I have a 1.5L ali cylinder and have tried clamping it to the rear, just behind the dill but was not happy with the profile. I currently have it clipped to the side of my backplate as I did when o/c, this is ok but a little cumbersome. I would be happy purchasing a new thinner cylinder i.e steel 1L but cant find one anywhere. Any Ideas please. Regards, Jeff
(Offline)