View Single Post
Old 23rd March 2006, 19:14   #7 (permalink)
J. V.
Custom Title Allowed!
 
J. V.'s Avatar

Current Rebreather/s:
rEvo

Other Rebreather/s:
Not Bought Yet
rEvo
 
Join Date: Mar 2006
Location: Lot & Savoie
Posts: 239
J. V. will become famous soon enoughJ. V. will become famous soon enoughJ. V. will become famous soon enough
Re: bent using a rebreather?

Two bend in right shoulder.

First was in Mediterranea after a dive around 80 m for 25 min, descent was a hard work because of current, hard work on the wreck too (cause our boat anchor was deep in the wreck - PpO2 fall around 0.5 at 80 m), and, last but not least, mistake in computer (HSE-O) programation, diluant breathed tmx 10/70, diluant programed 14/50. Pain came just some minutes after surfacing (I was always in the water). Treated by IWR, one hour O2 (open circuit) betwen 9 m and surface, and the days after an other hour O2 (CCR) betwen 6 and surface.

Second ten month after in tropical water, bend at the same place in the same shoulder. No spécial work, no program mistake, deco longer than HSE say (my buddy had a VR3). No special reason for bend, except it was an expedition with two dive by day. It was the second dive of the second day, around 90 m with diluant tmx 10/60 Two or three hours after the dive, pain come in right shoulder. Treated by IWR, 90 min O2 (CCR) between 9 m and surface.

Since this last pain, I use heliox as diluant and it seams to be better.
__________________
--------------------
Jacques
NPSFQQA-EDS IT # 007
(remué non agité)
(Offline)
 
Reply With Quote