Rebreather World - View Single Post - Can I use the Vr3/Drager interface with a Vr2

MAD · 20th January 2006, 20:23

If it's an old interface then chances are it's the old two pin style.

Newer VR3's and VR2's have a 7 pin connector.

If the connectors right, then yes you can...
If it's not, a new SCR cable will cost around £170!!! not Cheaper.

If this is the case, you might be better off getting a used/second hand 2 pin VR3.

Rgds

Mark

20th January 2006, 20:23	#3 (permalink)
MAD Rebreather World Writer Current Rebreather/s: Inspiration Classic Evolution Home Build Other Rebreather/s: Home Build Join Date: Feb 2005 Location: Northampton Posts: 71	Re: Can I use the Vr3/Drager interface with a Vr2 If it's an old interface then chances are it's the old two pin style. Newer VR3's and VR2's have a 7 pin connector. If the connectors right, then yes you can... If it's not, a new SCR cable will cost around £170!!! not Cheaper. If this is the case, you might be better off getting a used/second hand 2 pin VR3. Rgds Mark __________________ 1007 dives and finally I'm a novice... www.divejunkie.com
(Offline)