Rebreather World - View Single Post

***jradomski*** · 9th December 2005, 06:54

1. Unique rig (parts of insp,meg and custom)
2. 30 mins home / 60 mins for travelling,
3. No PHYSICAL checklist - But I always put my rig together and check the same way
4. I do a pos/neg, and really watch the neg
5. Always analyze. Also I always check the calibration but don't bother recalibrating unless it appears out (mostly because the HH holds calibration well.) add 15 mins if cal was off
6. Using my adapters to fll the cannister workes well for a real stable cal but it takes time.. I can verify my sensors to 1.2 at sea level

9th December 2005, 06:54	#2 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Home Build Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Home Build Join Date: Mar 2005 Location: "Da" Bronx Posts: 2,871	Re: How long does your setup take? 1. Unique rig (parts of insp,meg and custom) 2. 30 mins home / 60 mins for travelling, 3. No PHYSICAL checklist - But I always put my rig together and check the same way 4. I do a pos/neg, and really watch the neg 5. Always analyze. Also I always check the calibration but don't bother recalibrating unless it appears out (mostly because the HH holds calibration well.) add 15 mins if cal was off 6. Using my adapters to fll the cannister workes well for a real stable cal but it takes time.. I can verify my sensors to 1.2 at sea level __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)