Rebreather World - View Single Post

Hanssing · 8th May 2008, 21:42

Quote: (Originally Posted by Smudgegs)

Ok as a newbie to CCR (awaiting dates for my mod 1!) I got to wondering...
If I use a depth/time gauge and tables..
What tables do I use

I know I could set my "GAP" software to a CCR setpoint and use that but I wondered what you guys are using?
Cheers,
Smudge

HI,

You cut tables reflecting our dive, and various failures. On a CCR this means constant PPO for the dive and deco-portion when things goes according to plan, and some sort of bailout-plan from CCR to OC-gas.
Or you use acomputer: Table vs. computer discussion is the same for OC as CCR.

But assuming you use tables only; then yes, you set you GAP to run fixed setpoint (1.2/1.3 bar'ish). And setup the bail-out options.

regards
Nicolai

8th May 2008, 21:42	#4 (permalink)
Hanssing flap-flop ..... flap-flop Current Rebreather/s: rEvo Other Rebreather/s: rEvo Join Date: Nov 2005 Location: Denmark Posts: 378	Re: What deco tables? Quote: (Originally Posted by Smudgegs) Ok as a newbie to CCR (awaiting dates for my mod 1!) I got to wondering... If I use a depth/time gauge and tables.. What tables do I use I know I could set my "GAP" software to a CCR setpoint and use that but I wondered what you guys are using? Cheers, Smudge HI, You cut tables reflecting our dive, and various failures. On a CCR this means constant PPO for the dive and deco-portion when things goes according to plan, and some sort of bailout-plan from CCR to OC-gas. Or you use acomputer: Table vs. computer discussion is the same for OC as CCR. But assuming you use tables only; then yes, you set you GAP to run fixed setpoint (1.2/1.3 bar'ish). And setup the bail-out options. regards Nicolai __________________ Woohooo - I can change my rEvo! Its going to be bitchin' tricked out piece of gear
(Online)