Rebreather World - View Single Post - DrMike OC 2nd p-port adapters for Drager

Drmike · 6th May 2008, 04:27

Quote: (Originally Posted by mempilot)

Just to reiterate:

This was done to make the adapter fit the ATX50 series. The adapter will not fit over the flange and ridge.

For the intended Apeks series, I would use the adapter as prescribed. For this series, some minor mod is neccessary.

fair enough, although it would be far better to dremel the adapater than to mess up the 2nd stage. I am sure a supply of properly fitting ATX adpaters are only a machine shop away

With no flange or ridge now you will need a location for that screw even more. You may have to make that dimple

6th May 2008, 04:27	#17 (permalink)
Drmike RBW Member Current Rebreather/s: MK 15.X Ouroboros Other CCR Home Build Other Rebreather/s: Inspiration Classic Other CCR Home Build Join Date: Feb 2005 Posts: 3,378	Re: DrMike OC 2nd p-port adapters for Drager Quote: (Originally Posted by mempilot) Just to reiterate: This was done to make the adapter fit the ATX50 series. The adapter will not fit over the flange and ridge. For the intended Apeks series, I would use the adapter as prescribed. For this series, some minor mod is neccessary. fair enough, although it would be far better to dremel the adapater than to mess up the 2nd stage. I am sure a supply of properly fitting ATX adpaters are only a machine shop away With no flange or ridge now you will need a location for that screw even more. You may have to make that dimple __________________ Cave diving is a sport Wreck diving is a sport Diving in general is a sport 'Rebreather diving' is not a sport its the delusional obsession with a highly dangerous and often inappropriate piece of equipment Last edited by Drmike : 6th May 2008 at 04:31.
(Offline)