Rebreather World - View Single Post - Shearwater one-cell wireing to fisher??

paulraymaekers · 5th May 2008, 22:27

Quote: (Originally Posted by TR300)

In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell

)

regards
Holger

hello Holger, the shearwater pursuit calibrates correct on one cell if you connect it to input nr 2 (the middle reading)
if done so, itwill not show the 0.00 on the left and right

regards
paul

5th May 2008, 22:27	#5 (permalink)
paulraymaekers rEvo's daddy Current Rebreather/s: rEvo Other CCR Home Build Other Rebreather/s: rEvo Other CCR Home Build Join Date: May 2005 Location: belgium Posts: 1,640	Re: Shearwater one-cell wireing to fisher?? Quote: (Originally Posted by TR300) In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell ) regards Holger hello Holger, the shearwater pursuit calibrates correct on one cell if you connect it to input nr 2 (the middle reading) if done so, itwill not show the 0.00 on the left and right regards paul __________________ www.rEvo-rebreathers.com .... the earth is flat, Elvis is alive, and radial scrubbers give longer dwell time than axials...
(Offline)