Rebreather World - View Single Post - Shearwater one-cell wireing to fisher??

TR300 · 5th May 2008, 18:18

Quote: (Originally Posted by johan carlsson)

Thank's Martin

I will try this and get back to you all..
Thaught it was something like this.. :-)

Happy diver.

In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell

)

regards
Holger

5th May 2008, 18:18	#4 (permalink)
TR300 Holger Berghäuser Current Rebreather/s: Other CCR Dolphin Other SCR Home Build Other Rebreather/s: Not Bought Yet Other CCR Dolphin Other SCR Home Build Join Date: Jan 2005 Location: Weinheim, Germany Posts: 223	Re: Shearwater one-cell wireing to fisher?? Quote: (Originally Posted by johan carlsson) Thank's Martin I will try this and get back to you all.. Thaught it was something like this.. :-) Happy diver. In my mind I remember that the shearwater does not calibrate when not all 3 cells are connectect. If you use only one cell, best is to connect all 3 inlets (pins 2+3+4) together at on cell, so all three readings shows the same value. then its easy to calibrate, or wait for the SCR option (but not knowing if it works with one cell ) regards Holger __________________ If it makes bubbles it means its brocken Visit: www.tr300.com, Missions: www.rebreatherteam.de
(Offline)