Rebreather World - View Single Post

tamorgen · 28th April 2008, 15:39

I just got a response from Al Wright at Delta P. He seems to confirm my suspicions that once you set the C4 code, you must calibrate as if you have a CCR. You can set the calibration gas to Air and do the calibration, but you have to go into CCR mode to set the gas and perform the calibration. I'll let everyone know how it works. Thanks all for your input.

28th April 2008, 15:39	#11 (permalink)
tamorgen Gadget guru extrordinaire Current Rebreather/s: Dolphin Other Rebreather/s: Dolphin Join Date: Apr 2006 Location: Columbia, MD Posts: 183	Re: Calibrating the VR3 O2 Sensor I just got a response from Al Wright at Delta P. He seems to confirm my suspicions that once you set the C4 code, you must calibrate as if you have a CCR. You can set the calibration gas to Air and do the calibration, but you have to go into CCR mode to set the gas and perform the calibration. I'll let everyone know how it works. Thanks all for your input.
(Offline)