Rebreather World - View Single Post

KENT TOOLING · 27th April 2008, 17:15

Quote: (Originally Posted by taza)

Any recommendations on which Wing & backplate to fit to my Inspiration Vision.
I find the APD a bit of a pain also is it easy to change over.

Thanks

TAZA

Taza

You can fit a normal st/st or ally back plate on to the Inspiration with regarding the ridge where the manufold is i just packed this out with a couple of washers on the bottom bolt so this made it leavel, with the wing i use the custom divers VBS wing on my unit.

You can use a nomal wing but you might have to cable tie the top 3-4 loops so the top of the wing does NOT expand on to the hoses when the wing is inflated

John

27th April 2008, 17:15	#2 (permalink)
KENT TOOLING New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Aug 2005 Location: UK Posts: 51	Re: Backplate & Harness Quote: (Originally Posted by taza) Any recommendations on which Wing & backplate to fit to my Inspiration Vision. I find the APD a bit of a pain also is it easy to change over. Thanks TAZA Taza You can fit a normal st/st or ally back plate on to the Inspiration with regarding the ridge where the manufold is i just packed this out with a couple of washers on the bottom bolt so this made it leavel, with the wing i use the custom divers VBS wing on my unit. You can use a nomal wing but you might have to cable tie the top 3-4 loops so the top of the wing does NOT expand on to the hoses when the wing is inflated John __________________ John Perrin +44 01227 700015 (Technical Director) KENT TOOLING (Diving Products) www.divingproducts.co.uk Fire & Smoke Damper Manufactures +44 01227 700015 www.tri-prodanpers.co.uk
(Offline)