Rebreather World - View Single Post

tecdivertraining · 27th April 2008, 01:19

Quote: (Originally Posted by offpro)

Hi,

the past few dives I have had a problem with my primary hanset.. The menu button had a bad response and I had to push the button 10-20 times to enter the menu, so changing the setpoint was a pain in the ass... The setpoint was finally set to 0,7 and dived manually on high setpoint

Last night i cleaned and switched place on the menu and confirm butten and now everything is working perfect!

Is this a common problem with the handset on the Meg?

mats

Yes its quite common, as most do not get in and clean the button well when rinsing the handsets and the magnets rust, what you have done is a quick fix but maybe get a couple of spares from ISC as it might give you some jip later on the switched button.

27th April 2008, 01:19	#2 (permalink)
tecdivertraining RebreatherWorld Sponsor Current Rebreather/s: Inspiration Classic Inspiration Vision Evolution Megalodon Dolphin Other Rebreather/s: Not Bought Yet Dolphin Join Date: May 2005 Location: Phuket, Thailand Posts: 401	Re: problem with buttons.. Quote: (Originally Posted by offpro) Hi, the past few dives I have had a problem with my primary hanset.. The menu button had a bad response and I had to push the button 10-20 times to enter the menu, so changing the setpoint was a pain in the ass... The setpoint was finally set to 0,7 and dived manually on high setpoint Last night i cleaned and switched place on the menu and confirm butten and now everything is working perfect! Is this a common problem with the handset on the Meg? mats Yes its quite common, as most do not get in and clean the button well when rinsing the handsets and the magnets rust, what you have done is a quick fix but maybe get a couple of spares from ISC as it might give you some jip later on the switched button. __________________ Mathew Partridge Technical Director Pro-Tech Dive College www.protechdivers.com www.tech-ccr.com
(Offline)