Paul's way works fine with the hoses. This is one of the advantages to the Ray hoses.

I made a similar blower though, for loop drying (fits almost any rig). The inhale hose from the rig is removed from the rig and is plugged into the blower. The blower then pushes low volume air thru the loop hoses and the entire rig, exiting where the inhale hose was removed. Keeps the entire rig nice and dry. I only use it when preparing a rig for storage, and let it run a day or so depending on humidity. If you made one up with a P-Connector on the blower, it would be a nice accessory.


Dave


.