Rebreather World - View Single Post

scubanimal · 11th April 2008, 20:56

it all works now, but I can not tell you why. My only suspect is that I only have one new sensor and the current set installed is nearing end of life. Why the primary remained frozen for about 20 mins then magically got past the opening screen (despite numerous pressing of buttons) is still a mystery as well. As far as the sensors I'll replace all the older ones. Hope tomorrows dives are worth all this frustration.

edit.. now down to 11 minutes for the primary to get pass the opening screen.

how long does it take on your optima?

Thanks for the shoulders to whine on....

11th April 2008, 20:56	#2 (permalink)
scubanimal New Member Current Rebreather/s: Inspiration Vision Optima Other Rebreather/s: Inspiration Classic Join Date: May 2006 Location: San Diego Posts: 93	Re: Frozen primary display it all works now, but I can not tell you why. My only suspect is that I only have one new sensor and the current set installed is nearing end of life. Why the primary remained frozen for about 20 mins then magically got past the opening screen (despite numerous pressing of buttons) is still a mystery as well. As far as the sensors I'll replace all the older ones. Hope tomorrows dives are worth all this frustration. edit.. now down to 11 minutes for the primary to get pass the opening screen. how long does it take on your optima? Thanks for the shoulders to whine on.... Last edited by scubanimal : 11th April 2008 at 22:52.
(Offline)