Rebreather World - View Single Post

Skipbreather · 8th April 2008, 14:59

I'd clean it w/ a very fine (gray) grade of Scotch Brite Pad while keeping it oriented down (to keep shredded pad from falling in), wipe it down w/ a clean lint free cloth, then pressurize it and blow any errant bits of pad out w/ O2 by depressing the tip w/ a clean screwdriver tip. Blow it clean thoroughly or you risk bits of Scotch Brite eventually jamming your solenoid.

Just my $0.02

8th April 2008, 14:59	#2 (permalink)
Skipbreather WAY past the barber pole Current Rebreather/s: Megalodon Home Build Other Rebreather/s: Not Bought Yet MK 15.X Home Build Join Date: Mar 2005 Location: Chicago, Illinois, USA Posts: 524	Re: How to clean/maintain metal parts? I'd clean it w/ a very fine (gray) grade of Scotch Brite Pad while keeping it oriented down (to keep shredded pad from falling in), wipe it down w/ a clean lint free cloth, then pressurize it and blow any errant bits of pad out w/ O2 by depressing the tip w/ a clean screwdriver tip. Blow it clean thoroughly or you risk bits of Scotch Brite eventually jamming your solenoid. Just my $0.02 __________________ "Entropy RULES! Enjoy the interim."
(Offline)