Quote: (Originally Posted by
Dave1w)
Looking at the danshop site, it seems that they use the same spring....
The dolphin part is I think the same as the ray, but without the small hole.
Dave
well but in this case so where is the difference ?
I mean the ray works under 9 bars and the dolphin with a 16 bars MP and there is no apparent difference bwt the 2 devices ?
as there is apparently no way of tuning the adv how to make it work with the mp used.
as I told in a previous post, as long as my mp was set to arround 12 bars the adv was providing me ags without to much effort.
but I rencently reduced the mp to 9 bars to get rid of a leak situated on my second stage bail out regulator which working mp is 9,5 bars...so now it is very hard to get diluant intake in the loop while decending...is it really dangerous.
I've bought a ray adv/injector and machined a ring to clog the injector , so it is ok for me but I was just wandering the difference btw the 2 avd's just for my personnal knoledge and maybe for the other scr/ccr dolphin modifiers that will face the same problem then I did.
regards
jean mi