Rebreather World - View Single Post

Tino de Rijk · 22nd February 2008, 02:55

Dave is right (as usual). The conversion kit will consist of the following parts (this is the list for a medium size C/L conversion):

Case assembly EV10P (the new black & yellow case itself with room for the larger scrubber);
Oxygen inject hose EV20/03 (is longer than on Inspo, because it comes straight from 1st stage);
Oxygen inflator hose for counterlung EV20/04 (same story as above);
Diluent inflator hose for counterlung EV20/05 (if you want, you can shorten the existing Inspo hose instead, but realize you cannot build it back to an Inspiration anymore then…);
Oxygen high pressure hose EV20/08 (The existing Inspo hose is 130mm too long; if you can live with that, you can leave it as is. HP hoses cannot be shortened);
Diluent high pressure hose EV20/09 (Same story as above for oxygen HP hose);
Auto Air hose EV50/24 (Same story here: you can shorten the existing hose instead, but realize you cannot build it back to an Inspiration anymore then…);
Manifold to ADV hose AP300/10 (Same story here: you can shorten the existing hose instead, but realize you cannot build it back to an Inspiration anymore then…);
Manifold EV50/07 (the Evo manifold is smaller as it only has diluent in/outputs);
Diluent first stage FS101 (Only required if unit was originally supplied with Apeks first stages.The only reason you need this is because the angle of the MP hoses needs to be different for proper hose routing. The APD 1st stages cater for that. You could consider a 90 degree “knee” adapter on one of the hoses);
Oxygen first stage FS101A (same story as above for FS101)
2 litre diluent cylinder with valve AP6M/RB13
2 litre oxygen cylinder with valve AP6MOX/RB13A

If you go for the full kit as mentioned above, that will set you back around 760 pound. See their new online store for parts prices of you leave some parts out to reduce the price.

ciao,

Tino.

Quote: (Originally Posted by dave t)

You will also be able to buy "kits" to convert your inspo vision to an evo size. the kits will consist of a case, two 2l cyliders and any hoses that may be needed. It will be avalible middle of March..ish.

Dave

22nd February 2008, 02:55	#25 (permalink)
Tino de Rijk Old, maybe one day wise Current Rebreather/s: Inspiration Vision Other Rebreather/s: Inspiration Classic Evolution Join Date: Mar 2006 Location: Amsterdam Posts: 371	Re: New Evolution + Rebreather Dave is right (as usual). The conversion kit will consist of the following parts (this is the list for a medium size C/L conversion): Case assembly EV10P (the new black & yellow case itself with room for the larger scrubber); Oxygen inject hose EV20/03 (is longer than on Inspo, because it comes straight from 1st stage); Oxygen inflator hose for counterlung EV20/04 (same story as above); Diluent inflator hose for counterlung EV20/05 (if you want, you can shorten the existing Inspo hose instead, but realize you cannot build it back to an Inspiration anymore then…); Oxygen high pressure hose EV20/08 (The existing Inspo hose is 130mm too long; if you can live with that, you can leave it as is. HP hoses cannot be shortened); Diluent high pressure hose EV20/09 (Same story as above for oxygen HP hose); Auto Air hose EV50/24 (Same story here: you can shorten the existing hose instead, but realize you cannot build it back to an Inspiration anymore then…); Manifold to ADV hose AP300/10 (Same story here: you can shorten the existing hose instead, but realize you cannot build it back to an Inspiration anymore then…); Manifold EV50/07 (the Evo manifold is smaller as it only has diluent in/outputs); Diluent first stage FS101 (Only required if unit was originally supplied with Apeks first stages.The only reason you need this is because the angle of the MP hoses needs to be different for proper hose routing. The APD 1st stages cater for that. You could consider a 90 degree “knee” adapter on one of the hoses); Oxygen first stage FS101A (same story as above for FS101) 2 litre diluent cylinder with valve AP6M/RB13 2 litre oxygen cylinder with valve AP6MOX/RB13A If you go for the full kit as mentioned above, that will set you back around 760 pound. See their new online store for parts prices of you leave some parts out to reduce the price. ciao, Tino. Quote: (Originally Posted by dave t) You will also be able to buy "kits" to convert your inspo vision to an evo size. the kits will consist of a case, two 2l cyliders and any hoses that may be needed. It will be avalible middle of March..ish. Dave
(Offline)