Rebreather World - View Single Post

**Dave Sutton** · 14th February 2008, 11:41

Quote: (Originally Posted by Stephane)

Hi Peter,

Have a look at this: Rebreather World - View Single Post - which BOV

That is just a plate that moves the LED's slightly left for better viewing. it still uses the 'clip' system to attach to the BOV.

Pete, there are a number of other ways to do it, I made that clip for your KISS BOV, and the Golem is going to be made to slightly different dimensions. I can adjust the diameter of the semicircle, the thickness of the ring, and width of the design of the clip to adjust the tension to make it as secure as you like. I had also made a complete "circle" one for the KISS BOV that used a nylon setscrew to adjust tension, but ended up not using it as it made gear break-down for cleaning more difficult. Let's engineer a correct clip for the Golem, and then your KISS one can be passed down to someone else. I dove that design all last year on my KISS BOV and it was ideal. We just need to make a correct one for the Golem, and maybe use Delrin to replace the PVC to give it more 'snap'.

Talk later, I'll be out all day but back tomorrow.

Best,

Dave

.

14th February 2008, 11:41	#3 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Classic Kiss rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,672	Re: Golem Gear BOV/ rEvo HUD Quote: (Originally Posted by Stephane) Hi Peter, Have a look at this: Rebreather World - View Single Post - which BOV That is just a plate that moves the LED's slightly left for better viewing. it still uses the 'clip' system to attach to the BOV. Pete, there are a number of other ways to do it, I made that clip for your KISS BOV, and the Golem is going to be made to slightly different dimensions. I can adjust the diameter of the semicircle, the thickness of the ring, and width of the design of the clip to adjust the tension to make it as secure as you like. I had also made a complete "circle" one for the KISS BOV that used a nylon setscrew to adjust tension, but ended up not using it as it made gear break-down for cleaning more difficult. Let's engineer a correct clip for the Golem, and then your KISS one can be passed down to someone else. I dove that design all last year on my KISS BOV and it was ideal. We just need to make a correct one for the Golem, and maybe use Delrin to replace the PVC to give it more 'snap'. Talk later, I'll be out all day but back tomorrow. Best, Dave . __________________ "Changes in Lattitudes, Changes in Attitudes, Nothing remains quite the same".... www.nobubblediving.com
(Offline)