| Re: Who wants an OPV filter?
Filters are being shipped out today
see fitting instructions below.
Kit comprises of stainless steel filter mesh and plastic retainer ring
The retainer ring is designed to be a good interferance fit into the back of the opv housing. However Id recommend that the filter mesh is glued to the retainer and the retainer ring glued to the opv body.
See assembly pics below.
It is possible to fit them in without taking the opv body out of the lung - but its easier if you do.
and now the usual legal bit:-
note:
BY USING THESE PARTS YOU AGREE TO EXEMPT AND RELEASE DR MICHAEL GADD AND HIS DISTRIBUTORS FROM ALL LIABILITY OR RESPONSIBILITY WHATSOEVER FOR PERSONAL INJURY, PROPERTY DAMAGE OR WRONGFUL DEATH AS A RESULT FROM USING THE PARTS, HOWEVER CAUSED, INCLUDING, BUT NOT LIMITED TO PRODUCT LIABILTY OR THE NEGLIGENCE OF THE RELEASED PARTIES, WHETHER PASSIVE OR ACTIVE.
THESE PARTS YOU ASSEMBLE AND USE AT YOUR OWN RISK THEY CAN KILL YOU AND MAY INVALIDATE YOUR REBREATHER WARRANTY OR INSURANCE
__________________
Get a girlfriend you sad twat - a Rebreather is an unfaithful mistress - dont blind yourself to her faults just because she goes down on you
Last edited by Drmike : 7th January 2008 at 03:03.
|