Rebreather World - View Single Post

**Dave1w** · 1st January 2008, 04:43

Hi Pete,
There is an issue because the Drager 1st Stage is fixed IP and high at about 16 bar I think. What a few people have done is use a H-Valve, so that they can run a seperate 1st stage from the same tank for bailout etc. And if need be shut down the dolphin dosage.

Hope this helps

Dave

1st January 2008, 04:43	#3 (permalink)
Dave1w Born Again Diver! Current Rebreather/s: Sport Kiss Dolphin Ray Home Build Other Rebreather/s: Classic Kiss Dolphin Ray Home Build Join Date: Jan 2005 Location: Singapore / UK Posts: 379	Re: Octopus on a Drager First Stage Hi Pete, There is an issue because the Drager 1st Stage is fixed IP and high at about 16 bar I think. What a few people have done is use a H-Valve, so that they can run a seperate 1st stage from the same tank for bailout etc. And if need be shut down the dolphin dosage. Hope this helps Dave __________________ This message may contain spelling mistakes as it was generated by an idiot.
(Online)