Rebreather World - View Single Post

Dsix36 · 25th December 2007, 04:20

Quote: (Originally Posted by ScubaDadMiami)

I'd like to see a cut out for the oxygen connector that goes to the solenoid inlet, giving plenty of space there. Can you show a close up of how your plate looks with the 27 tanks in the unit and the oxygen line connected?

There is no need for a cutout for the O2 line. It follows the contour of the plate and is outside of it.
I do not have my head. It is packaged for shipment to Jeurgenson for repair. I have used the water trap end, masking tape, and my finger to approximate what it looks like when assembled with the steel 27's.

25th December 2007, 04:20	#7 (permalink)
Dsix36 Going Down? Current Rebreather/s: Optima Other Rebreather/s: Join Date: Aug 2007 Location: Deerfield Beach, Florida Posts: 1,145	Re: New Optima Backplate Quote: (Originally Posted by ScubaDadMiami) I'd like to see a cut out for the oxygen connector that goes to the solenoid inlet, giving plenty of space there. Can you show a close up of how your plate looks with the 27 tanks in the unit and the oxygen line connected? There is no need for a cutout for the O2 line. It follows the contour of the plate and is outside of it. I do not have my head. It is packaged for shipment to Jeurgenson for repair. I have used the water trap end, masking tape, and my finger to approximate what it looks like when assembled with the steel 27's. __________________ THE MORE THAT I LEARN, THE MORE THAT I STILL NEED TO LEARN!!!!!!
(Offline)