Rebreather World - View Single Post

***jradomski*** · 21st December 2007, 08:12

Quote: (Originally Posted by silent running)

And if flood tolerance is the big concern in the HH design why not also have a drain in the bottom of the scrubber bucket?

.

No need.. You can trap ALOT of water at the bottom of the bucket.. The normal spacer is at least 2 inches (I never measured it) by over 6 inches in diameter...

If my rough approximations are correct thats about 1 l of volume..

21st December 2007, 08:12	#24 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Home Build Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Home Build Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,004	Re: Hammerhead CCR Web Pages Up Quote: (Originally Posted by silent running) And if flood tolerance is the big concern in the HH design why not also have a drain in the bottom of the scrubber bucket? . No need.. You can trap ALOT of water at the bottom of the bucket.. The normal spacer is at least 2 inches (I never measured it) by over 6 inches in diameter... If my rough approximations are correct thats about 1 l of volume.. __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated. Last edited by jradomski : 21st December 2007 at 09:03.
(Offline)