Rebreather World - View Single Post

**Dave Sutton** · 11th December 2007, 12:20

Good photo and good method. To make sure the others see what the photo shows, it is a small mirror (think dentist) put into the port. You can see the continuous weld. Easy inspection.

Once again, if you see the weld on the outside you are OK for sure. If you do not.... it may *still* be OK. Or maybe not... check it!

Dave

11th December 2007, 12:20	#26 (permalink)
Dave Sutton Diveshop of Horrors Current Rebreather/s: Sport Kiss MK 15.X rEvo Other CCR Azimuth Home Build Other Rebreather/s: Evolution Megalodon rEvo Other CCR Azimuth Home Build Join Date: Jun 2006 Location: Narragansett, Rhode Island and Hackettstown, New Jersey Posts: 2,907	Re: Dangerous Azimuth scrubber Good photo and good method. To make sure the others see what the photo shows, it is a small mirror (think dentist) put into the port. You can see the continuous weld. Easy inspection. Once again, if you see the weld on the outside you are OK for sure. If you do not.... it may still be OK. Or maybe not... check it! Dave __________________ "Silent Diving with No Bubbles and No Politics".... www.nobubblediving.com
(Offline)