Rebreather World - View Single Post

jaap · 6th December 2007, 21:27

Quote: (Originally Posted by TPAD)

Hi
I read this some time back and tested mine with water ---- aaarrrg !!
on cutting the scrubber open only 4 small tacks held the baffle in place - water and co2 had a direct path to the inhale side,
i think a continuous Tig welds best - the gaps on mine were upto 3mm wide - will sealant plug that ?
regards
Tim

I guess you will perhaps be contacted by someone related to the Azimuth manufacturing. If not please pm me you email if you want to be contacted.

If I was you I would not feel comfortable with the sealant option. If you cut it open you would have to weld on it anyway?

6th December 2007, 21:27	#8 (permalink)
jaap Normal people worry me Current Rebreather/s: Classic Kiss Other CCR RB80 / Clone Ray Other SCR Home Build Other Rebreather/s: Other CCR RB80 / Clone Ray Other SCR Home Build Join Date: Jun 2005 Location: Stockholm Sweden Posts: 451	Re: Dangerous Azimuth scrubber Quote: (Originally Posted by TPAD) Hi I read this some time back and tested mine with water ---- aaarrrg !! on cutting the scrubber open only 4 small tacks held the baffle in place - water and co2 had a direct path to the inhale side, i think a continuous Tig welds best - the gaps on mine were upto 3mm wide - will sealant plug that ? regards Tim I guess you will perhaps be contacted by someone related to the Azimuth manufacturing. If not please pm me you email if you want to be contacted. If I was you I would not feel comfortable with the sealant option. If you cut it open you would have to weld on it anyway? __________________ My initials: JAAP
(Offline)