Rebreather World - View Single Post

TPAD · 6th December 2007, 20:19

Hi
I read this some time back and tested mine with water ---- aaarrrg !!
on cutting the scrubber open only 4 small tacks held the baffle in place - water and co2 had a direct path to the inhale side,
i think a continuous Tig welds best - the gaps on mine were upto 3mm wide - will sealant plug that ?
regards
Tim

6th December 2007, 20:19	#7 (permalink)
TPAD New Member Current Rebreather/s: Azimuth Other Rebreather/s: Azimuth Join Date: Oct 2007 Location: wales Posts: 5	Re: Dangerous Azimuth scrubber Hi I read this some time back and tested mine with water ---- aaarrrg !! on cutting the scrubber open only 4 small tacks held the baffle in place - water and co2 had a direct path to the inhale side, i think a continuous Tig welds best - the gaps on mine were upto 3mm wide - will sealant plug that ? regards Tim
(Offline)