Rebreather World - View Single Post

mscammon · 1st December 2007, 18:10

Quote: (Originally Posted by heyydude)

Hey All,

Just a quick note:

All of the initial run Hammerhead CCR's have been sold, and we are building 25 more for late December/January build.

Of those, 8 are already pre-sold, leaving 17.

Joe Radomski is setting up training for Instructors, as well as the first crop of HH Divers. Tom Mount is also building up a program for IANTD, as I've mentioned before.

We are allotting units on a "FIFO" basis (First In, First Out). I mention this because we are getting a high degree of traffic, and everyone seems to have the "dive trip of a lifetime" thing going on again.

Divers...

If you wish to order a unit for this particular build, please e-mail Tricia <accounting@rebreather.us> with your particulars. We'll assign a number to your order and build accordingly.

Thanks a bunch! The response so far has been just awesome.

Take care,

Kevin Juergensen
Juergensen Marine, Inc.

Hi Kevin,

I own a DiveRite rebreather that has your older model aluminum housing Hammerheads. I saw your post on rebreatherworld and would like to upgrade to your new delrin model Hammerhead hand sets.

What information do you need from me to order these new hand sets and how much will it cost me to have them replaced? I can install them myself. My rebreather certification is TDI #202475. My training was done over a year ago with W. E. Adams.

Michael Scammon
TDI & SSI Instructor with Lynnhaven Dive Center

1st December 2007, 18:10	#4 (permalink)
mscammon New Member Current Rebreather/s: Optima Other Rebreather/s: Join Date: Oct 2007 Location: Norfolk, VA USA Posts: 3	Re: Hammerhead CCR Orders Quote: (Originally Posted by heyydude) Hey All, Just a quick note: All of the initial run Hammerhead CCR's have been sold, and we are building 25 more for late December/January build. Of those, 8 are already pre-sold, leaving 17. Joe Radomski is setting up training for Instructors, as well as the first crop of HH Divers. Tom Mount is also building up a program for IANTD, as I've mentioned before. We are allotting units on a "FIFO" basis (First In, First Out). I mention this because we are getting a high degree of traffic, and everyone seems to have the "dive trip of a lifetime" thing going on again. Divers... If you wish to order a unit for this particular build, please e-mail Tricia <accounting@rebreather.us> with your particulars. We'll assign a number to your order and build accordingly. Thanks a bunch! The response so far has been just awesome. Take care, Kevin Juergensen Juergensen Marine, Inc. Hi Kevin, I own a DiveRite rebreather that has your older model aluminum housing Hammerheads. I saw your post on rebreatherworld and would like to upgrade to your new delrin model Hammerhead hand sets. What information do you need from me to order these new hand sets and how much will it cost me to have them replaced? I can install them myself. My rebreather certification is TDI #202475. My training was done over a year ago with W. E. Adams. Michael Scammon TDI & SSI Instructor with Lynnhaven Dive Center Last edited by mscammon : 1st December 2007 at 18:12. Reason: duplicate
(Offline)