Quote: (Originally Posted by
Mr_Pyro)
Sorry for a bit of newbee question..
Is it possible to have both a HUD and a Shearwater Pursuit or VR3/HS-Explorer hooked up to a cell in the pelagian while keeping two cells reserved for the original controler. Doesn't one need four cells for a setup like this? Is there some type of cell splitter/amplifier or is the current of one cell strong enough to produce readings for two diffrent devices?
Cheers
/Mr_Pyro
This is the standard intended use and this would also preserve electrical isolation between the Pelagian display and the added displays. Also the intended use of the Pursuit and Shearwater HUD is to share cell(s).
According to Bruce he will modify the HUD so it accepts running of one cell if you order it that way. Otherwise you could use the VR3 and Delta P HUD to run off one cell.
Andy