Rebreather World - View Single Post

Benthic · 13th November 2007, 15:04

Quote: (Originally Posted by netmage)

For those of us w/o access to a lathe....

Wouldn't the ISC dust caps suffice? Same size, you get two... remove the string, modify existing hole for the new barb and orifice combination...?

Calibration kit is $63...
2 dust caps are $20...

barbs, orifice and tubing can't be ~$86 worth of materials for two calibration plugs.

-Tim

Tim,

I had similar thoughts. However, if memory serves, the caps for the top of the head (where the loop connects) are a different size than the opening at the bottom of the head where the scrubber fits.

Brian

13th November 2007, 15:04	#15 (permalink)
Benthic MEGalomaniac Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Jan 2006 Location: Pensacola, FL USA Posts: 224	Re: Easy Meg Calibration Revisited Quote: (Originally Posted by netmage) For those of us w/o access to a lathe.... Wouldn't the ISC dust caps suffice? Same size, you get two... remove the string, modify existing hole for the new barb and orifice combination...? Calibration kit is $63... 2 dust caps are $20... barbs, orifice and tubing can't be ~$86 worth of materials for two calibration plugs. -Tim Tim, I had similar thoughts. However, if memory serves, the caps for the top of the head (where the loop connects) are a different size than the opening at the bottom of the head where the scrubber fits. Brian __________________ Well lit rooms will not repel determined beer ninjas.
(Offline)