Rebreather World - View Single Post

barney · 5th November 2007, 01:42

4. These are the two parts you need to make the modification.

5. Flip your shutoff valve and thread directly into the ADV body. To keep the shutoff direction the same (i.e., muscle memory), I have switched to an M&J Engineering shutoff valve.

6. Add the threaded fitting into the end of the shutoff valve.

7. Add the QR valve and you are good to go.

Thanks again Lamar!

5th November 2007, 01:42	#2 (permalink)
barney EXPLORER Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Aug 2005 Location: St. Petersburg, FL Posts: 291	Re: MEG ADV modification 4. These are the two parts you need to make the modification. 5. Flip your shutoff valve and thread directly into the ADV body. To keep the shutoff direction the same (i.e., muscle memory), I have switched to an M&J Engineering shutoff valve. 6. Add the threaded fitting into the end of the shutoff valve. 7. Add the QR valve and you are good to go. Thanks again Lamar! __________________ Michael C. Barnette ASSOCIATION OF UNDERWATER EXPLORERS
(Offline)