Rebreather World - View Single Post - Prism Topaz

**DeepBlueInnovation** · 24th October 2007, 01:23

Quote: (Originally Posted by apitkin)

Out of interest, who has had to have the analogue meter in their secondary replaced rather than one of the reed switches (which is what died on my secondary)?
Andy

I have had mine sent back to the factory for repair that basically involved a rebuild, however the battery indicator still doesn't work and it reads 1/2 a point below the actual set point as the handset was never zeroed out correctly.

So I have got a sub-sea display from Jason but have to send the head and handset over to him to have it adjusted as the setpoint output on my head seems to differ slightly from other heads (mine was a very early unit - clear head) and there is a very tight tolerance.

Cheers,

Ben.

24th October 2007, 01:23	#23 (permalink)
DeepBlueInnovation Learning to Kiss Current Rebreather/s: Not Bought Yet Other Rebreather/s: Prism Topaz Not Bought Yet Join Date: Sep 2005 Location: Perth, Western Australia Posts: 358	Re: Prism Topaz - Analog Secondary & Cell Sensors Quote: (Originally Posted by apitkin) Out of interest, who has had to have the analogue meter in their secondary replaced rather than one of the reed switches (which is what died on my secondary)? Andy I have had mine sent back to the factory for repair that basically involved a rebuild, however the battery indicator still doesn't work and it reads 1/2 a point below the actual set point as the handset was never zeroed out correctly. So I have got a sub-sea display from Jason but have to send the head and handset over to him to have it adjusted as the setpoint output on my head seems to differ slightly from other heads (mine was a very early unit - clear head) and there is a very tight tolerance. Cheers, Ben.
(Offline)