Rebreather World - View Single Post

divescot · 21st October 2007, 20:47

OK, done all stages and millivolt reading does not change. Once unit is calibrated to 98% and I breath off the loop the reading does not change. either port is stuck on vr3 or cell has gone very wrong. so...I changed the cell and no change, still gives me the exact same mV rating, surely that can't be correct.

Going to give up for this evening and try again tomorrow.

Cheers

Mark

21st October 2007, 20:47	#11 (permalink)
divescot New Member Current Rebreather/s: Inspiration Classic Other Rebreather/s: Join Date: Oct 2005 Location: UK Posts: 36	Re: about to throw VR3 brick away OK, done all stages and millivolt reading does not change. Once unit is calibrated to 98% and I breath off the loop the reading does not change. either port is stuck on vr3 or cell has gone very wrong. so...I changed the cell and no change, still gives me the exact same mV rating, surely that can't be correct. Going to give up for this evening and try again tomorrow. Cheers Mark
(Offline)