Rebreather World - View Single Post - Meg o-ring specs?

***jradomski*** · 12th September 2007, 23:35

Quote: (Originally Posted by York)

If you mean the O-rings that go onto the end of the hoses, the part that gets hand-screwed down onto the Meg head, its a 2-123. Pretty sure it's Buna-N (red).
http://www.parker.com/o-ring/Static/...ize%20list.pdf

hope that helps
Joerg

also when I originally asked Leon if the red orings were silicon he replied yes.. All the o-ring Info I put in the ANDI manual came from asking Leon for the sizes and composition..

The r3ed o-rings on my meg t-pieces definately are not burna n... They are silicone...

12th September 2007, 23:35	#7 (permalink)
*jradomski* Moderator Current Rebreather/s: Inspiration Classic Sport Kiss Optima rEvo Other CCR Other Rebreather/s: Inspiration Vision Evolution Megalodon Classic Kiss rEvo Other CCR Join Date: Mar 2005 Location: "Da" Bronx Posts: 3,110	Re: Meg o-ring specs? Quote: (Originally Posted by York) If you mean the O-rings that go onto the end of the hoses, the part that gets hand-screwed down onto the Meg head, its a 2-123. Pretty sure it's Buna-N (red). http://www.parker.com/o-ring/Static/...ize%20list.pdf hope that helps Joerg also when I originally asked Leon if the red orings were silicon he replied yes.. All the o-ring Info I put in the ANDI manual came from asking Leon for the sizes and composition.. The r3ed o-rings on my meg t-pieces definately are not burna n... They are silicone... __________________ Joe Radomski CCR Trimix Instructor Trainer ANDI Instructor Trainer Director #10 All posts are personal opinions and DO NOT reflect any affiliated agency unless specifically stated.
(Offline)