Rebreather World - View Single Post - My Installation of the Shearwater GF and HUD to the Copis Megalodon Rebreather

steveflight · 24th August 2007, 01:58

Quote: (Originally Posted by Gill Envy)

the stock copis handset is still in place in port P. To have all three hooked up would take soldering I believe and i'm not sure how each addition might effect the millivolts.

Thanks for sharing, It looks great.

The guys at Juargesen were able to keep my Copis Handset connected with the hammerhead and it works great, I've not had any problems with the MV and it's still redundant as they both use their own power.

Like you said it may require some soldering.

24th August 2007, 01:58	#7 (permalink)
steveflight New Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Feb 2007 Location: Ft lauderdale Posts: 31	Re: My Installation of the Shearwater GF and HUD to the Copis Megalodon Rebreather Quote: (Originally Posted by Gill Envy) the stock copis handset is still in place in port P. To have all three hooked up would take soldering I believe and i'm not sure how each addition might effect the millivolts. Thanks for sharing, It looks great. The guys at Juargesen were able to keep my Copis Handset connected with the hammerhead and it works great, I've not had any problems with the MV and it's still redundant as they both use their own power. Like you said it may require some soldering. __________________ Be prepared,. when Noel Built the Arc it wasn't raining .. Unknown.
(Offline)