Rebreather World - View Single Post

decoweenie · 21st July 2007, 05:15

Quote: (Originally Posted by Philippe GERIN)

Great, I've got one somewhere in a box

Could you PM me a picture?

I will take one later...

Quote:

with the Meg T-piece at the other end? On a BMCLs rig I guess as you dive only that? But the Ray hose would be too long for a OTSCLs rig I'm guessing.

I was going to disassemble the Meg loop and make up a BMCL with its T-pieces, but found out that I would need a 700-dollar tool to tighten it to the CL...

I dive all of the units I have with the same BMCL, and everything else, so really convenient to set-up when just having to chose which scrubber to use.

And you just need to trim the Ray hose to length if you want a little less, but full length isn't bad as it is a very flexible hose thus not getting in the way.

21st July 2007, 05:15	#6 (permalink)
decoweenie Crash Test Dummy Current Rebreather/s: Other CCR Other Rebreather/s: Other CCR Join Date: Feb 2005 Location: Cairo Posts: 5,510	Re: Manifold and Breathing hose Qs Quote: (Originally Posted by Philippe GERIN) Great, I've got one somewhere in a box Could you PM me a picture? I will take one later... Quote: with the Meg T-piece at the other end? On a BMCLs rig I guess as you dive only that? But the Ray hose would be too long for a OTSCLs rig I'm guessing. I was going to disassemble the Meg loop and make up a BMCL with its T-pieces, but found out that I would need a 700-dollar tool to tighten it to the CL... I dive all of the units I have with the same BMCL, and everything else, so really convenient to set-up when just having to chose which scrubber to use. And you just need to trim the Ray hose to length if you want a little less, but full length isn't bad as it is a very flexible hose thus not getting in the way. __________________ "...after a while you get bored offering advice to a bull that like to keep butting the fence with its head rather than walking through the open gate..." - Rebreather World PM
(Offline)