| John,
It sounds like what you are experiencing is just the result of a fast decent and the ADV not being very "automatic". I doubt the attitude of decent has anything to do with it, other than making the CLs bottom out earlier. You need to check that the two short lengths of webbing on the CL adjacent the ADV are folding out when the CL collapses. I found that if I did not fix it early, one side (usually the inside - that is closest to centre) collapses partially underneath the ADV, stopping the ADV from "landing" squarely on the activating button inside the CL.
Does this make sense in your scenario?
Cheers |