Rebreather World - View Single Post - Our compact plate for PRISM head and basket

silent running · 19th April 2007, 02:18

Quote: (Originally Posted by dive2dive2000)

Hi Andy,

Did you find any problems or differences in installing and removing scrubber? Stiffness of steal plate as opposed to plastic, curious if this presented any problems.

Hi Marty, if anything, I found the scrubber bucket came off a little more easily with the rigid plate. It also went on a bit easier, maybe because the additional rigidity allows you to transfer the force more effectively. I did have to shim out the lower screws on the head with 2 washers on each side to get the head/bucket to sit nice and paralell with the plate though.

19th April 2007, 02:18	#51 (permalink)
silent running Mature mouth breather Current Rebreather/s: Prism Topaz Other Rebreather/s: Join Date: Jun 2005 Location: U.S.A. Brooklyn, New York Posts: 1,813	Re: Our compact plate for PRISM head and basket Quote: (Originally Posted by dive2dive2000) Hi Andy, Did you find any problems or differences in installing and removing scrubber? Stiffness of steal plate as opposed to plastic, curious if this presented any problems. Hi Marty, if anything, I found the scrubber bucket came off a little more easily with the rigid plate. It also went on a bit easier, maybe because the additional rigidity allows you to transfer the force more effectively. I did have to shim out the lower screws on the head with 2 washers on each side to get the head/bucket to sit nice and paralell with the plate though.
(Offline)