Hi

I'm using a Submatix SMS (mCCR) with the rEvodream. For me the CCR version of the rEvodream is working fine.

Submatix has a new sensorholder which is mounted obove the inhale lung direct on the case. The new holder allows you use 2 O2 cells. With a single cathode you will have 2 signals and with double cathode cells you can get 4 signals. I have installed 2 standard O2 Cells.

From the sensorholder a small cable goes to a manifold. The manifold is mounted next to the scrubber. From the manifold a cable with a 7 pin fisher connector is going to my VR3 (one O2 Cell). On the bottom of the manifold is a fisher socket for the rEvodream (one O2 Cell). I mounted a fisher connector on the rEvodream to remove it from the Submatix if needed. The rEvodream itself is mounted on the diluent gauge. The cable for the HUD is routed between the jacket and the case. The rEvodream is configured to use only one O2 cell. But the configuration is flexible. I can share O2 cells, if needed (2 x rEvodream plus 1 shared VR3) or I can use double cathode cells...

If you are interested, I can take some pictures of the configuration.

DINspiration


P.S. Using the rEvodream with the Submatix SMS is just great! I really love the rEvodream.....